Steel & Metal
Structural steel beams, HEA/HEB profiles, hollow sections (RHS/SHS/CHS), reinforcement bars, galvanized sheets, and metal mesh are available in standard EN 10025 and ASTM grades. Rebar is supplied in S400 and S500 yield strength classes, with diameters ranging from 8mm to 32mm. Galvanized and stainless steel options are available for corrosive environments and exterior applications. Custom cutting, bending, and fabrication services are available on request.
Timber & Wood
Structural softwood, hardwood planks, glulam beams, OSB boards, plywood sheets, and pressure-treated lumber are available in various strength classes and moisture resistance grades. Timber is graded according to EN 338 structural classes, ranging from C16 to C35 for softwood species. Fire-retardant and preservative-treated options are available for both interior and exterior structural use. Dimensions are available in standard and custom lengths up to 12 meters.
Structural Glass & Glass Blocks
Tempered glass, laminated safety glass, insulated glass units (IGU), and structural glass blocks are available for facades, partitions, skylights, and load-bearing applications. Tempered glass is supplied in thicknesses from 4mm to 19mm with surface compression exceeding 90 MPa, complying with EN 12150. Laminated safety glass with PVB and SGP interlayers is available for overhead glazing and blast-resistant applications. IGUs are manufactured with argon or krypton gas filling, achieving center-of-glass U-values as low as 0.5 W/m²K.
Bricks & Blocks
Solid and hollow clay bricks, concrete blocks, autoclaved aerated concrete (AAC) blocks, and refractory bricks are available in standard and custom compressive strength classes. Clay bricks are supplied in compressive strength classes from 5 to 60 N/mm², with frost resistance and water absorption ratings to EN 771-1. AAC blocks offer thermal conductivity values as low as 0.09 W/mK, providing excellent insulation for external wall systems. Refractory bricks are available in temperature resistance classes up to 1800°C for industrial furnace and fireplace applications.
Cement & Concrete
Portland cement, ready-mix concrete, precast elements, and high-performance additives are available in standard and custom grades. Compressive strength classes range from C20/25 to C50/60, suitable for both residential foundations and heavy structural applications. Concrete admixtures include plasticizers, accelerators, and retarders to meet specific curing and workability requirements. All products comply with EN 197 and ASTM C150 standards.
Mortars, Limes & Binding Agents
Dry-mix mortars, hydraulic lime, hydrated lime, masonry cement, and specialty binding agents are available for bonding, plastering, rendering, and restoration work. Thin-bed mortars are formulated for AAC block and large-format tile installation with joint thicknesses of 1–3mm. Hydraulic lime NHL 2, NHL 3.5, and NHL 5 classes are available for heritage restoration and breathable construction systems. All mortars comply with EN 998-1 and EN 998-2 standards for consistency, adhesion strength, and shrinkage performance.
Sand & Aggregates
Fine sand, coarse sand, crushed stone, gravel, and recycled aggregates are graded and tested for compaction, drainage, and load-bearing performance. Particle size distributions are available from 0–4mm fine sand to 20–40mm coarse aggregates, suitable for concrete mixing, road base, and drainage layers. Materials are sourced from certified quarries and tested for silt content, moisture absorption, and crushing value. Bulk and bagged formats are available for any project scale.