Doors & Windows
uPVC, aluminum, and timber-framed doors and windows are available in single, double, and triple glazed configurations with U-values as low as 0.8 W/m²K. Fire-rated doors are supplied in EI30, EI60, and EI90 classifications, suitable for commercial and industrial fire compartmentation. Acoustic-rated units are available with Rw values up to 45dB for noise-sensitive environments. All units comply with EN 14351 and can be supplied in standard and custom dimensions.
Flooring & Walls
Ceramic and porcelain tiles, vinyl flooring, laminate panels, gypsum boards, and wall cladding systems are available for residential, commercial, and industrial applications. Porcelain tiles are supplied in PEI wear resistance classes I to V, with slip resistance ratings R9 to R13 for wet and industrial areas. Gypsum boards are available in standard, moisture-resistant, and fire-resistant types complying with EN 520. Large-format tiles up to 120x260cm are available for contemporary architectural finishes.
Plumbing & Sanitary
PVC, PPR, HDPE, and copper piping systems are available in pressure ratings from PN6 to PN25, suitable for cold water, hot water, and heating applications. Push-fit, compression, and solvent-weld fittings are stocked across all pipe systems for fast and reliable installation. Sanitary ware includes wall-hung and floor-mounted WCs, basins, shower trays, and bathtubs from certified European manufacturers. Drainage solutions include PVC and cast iron systems with rodding access points and inspection chambers.
Hardware & Fasteners
Bolts, nuts, anchors, screws, nails, brackets, hinges, and locking systems are available in carbon steel, stainless steel A2/A4, and hot-dip galvanized variants. Anchor bolts and chemical anchors are available in M8 to M30 diameters, tested for pull-out and shear loads in concrete and masonry substrates. Stainless steel A4 grade fasteners are suitable for marine and highly corrosive environments with long-term corrosion resistance. All fasteners comply with EN ISO and DIN standards for dimensional accuracy and mechanical performance.
