Roof Tiles & Shingles
Clay roof tiles, concrete tiles, bitumen shingles, and metal roofing panels are available in various profiles including flat, Roman, and interlocking designs. Clay tiles are fired to EN 1304 standards with frost resistance class F2 and water absorption below 6%. Metal roofing panels are available in pre-painted steel and aluminum with PVDF coatings offering 30+ year color durability. Thermal resistance values and wind uplift ratings are available for all roofing systems upon request.
Bricks & Blocks
Solid and hollow clay bricks, concrete blocks, autoclaved aerated concrete (AAC) blocks, and refractory bricks are available in standard and custom compressive strength classes. Clay bricks are supplied in compressive strength classes from 5 to 60 N/mm², with frost resistance and water absorption ratings to EN 771-1. AAC blocks offer thermal conductivity values as low as 0.09 W/mK, providing excellent insulation for external wall systems. Refractory bricks are available in temperature resistance classes up to 1800°C for industrial furnace and fireplace applications.
Structural Glass & Glass Blocks
Tempered glass, laminated safety glass, insulated glass units (IGU), and structural glass blocks are available for facades, partitions, skylights, and load-bearing applications. Tempered glass is supplied in thicknesses from 4mm to 19mm with surface compression exceeding 90 MPa, complying with EN 12150. Laminated safety glass with PVB and SGP interlayers is available for overhead glazing and blast-resistant applications. IGUs are manufactured with argon or krypton gas filling, achieving center-of-glass U-values as low as 0.5 W/m²K.
Mortars, Limes & Binding Agents
Dry-mix mortars, hydraulic lime, hydrated lime, masonry cement, and specialty binding agents are available for bonding, plastering, rendering, and restoration work. Thin-bed mortars are formulated for AAC block and large-format tile installation with joint thicknesses of 1–3mm. Hydraulic lime NHL 2, NHL 3.5, and NHL 5 classes are available for heritage restoration and breathable construction systems. All mortars comply with EN 998-1 and EN 998-2 standards for consistency, adhesion strength, and shrinkage performance.
